Keep Your Home Comfortable With Quality HVAC Services In Cheshire CT
X-Treme Temp Heating & Cooling is your go-to HVAC service provider in Cheshire, CT! We’re the experts in home comfort year-round, from AC and heating repair to ductwork and water heaters. We’ve got you covered from installation to maintenance so you can have peace of mind about your heating and air conditioning.
Read the reviews below from Cheshire, CT residents to see what your neighbors say about our expertise and customer service. We can’t wait to work with you!
Local Reviews
for Cheshire, CT
Our Reviews by City
Great service
Sheila fuda - Cheshire, CT 06410
Great service as usual, technician very respectful and knew what he was doing, very happy with this visit!
Response from X-Treme Temp Heating & Cooling, LLC:
We are so grateful for your 5-star review. Thanks for sharing your rating with us and the community.
Excellent Service
john - Cheshire, CT 06410
Andrew was personable, informative but most of all he was very capable. When he left I was very confident the boiler was running the best it could.
Excellent Service
Fred/Martha - Cheshire, CT 06410
Andrew was punctual and polite. He worked efficiently and went the extra mile I. Cleaning up some footprints in the kitchen.
Professional, timely, and reasonably priced
Tyler - Cheshire, CT 06410
On time. Reasonable prices. Clean. Polite
Excellent Service
Jack - Cheshire, CT 06410
Larry came out quickly and was able to fix our leak from the furnace. He courteous and explained things so I could understand them. Highly recommend Xtreme heating
Excellent service
Jack - Cheshire, CT 06410
Larry was very professional and did a thorough cleaning of our heating system. Very satisfied
Service Survey
Adam - Cheshire, CT 06410
Andrew was courteous, informative and thorough in his repairs and explanations including a follow-up for a leak detected.
Excellent service
Shelia - Cheshire, CT 06410
Great Job
Brendan - Cheshire, CT 06410
Response from X-Treme Temp Heating & Cooling, LLC:
Thank you for taking the time to leave such a positive review! We're glad to hear you had a great experience with us.
Awesome service and price!
Jing - Cheshire, CT 06410
X-treme Temp has been serving my house for many years. They are very professional and always provide awesome work. Before the scheduled time, I would receive notification that technicians are coming. After technicians(Andrew and Larry) arrive on time, they ask us if we have any questions. They wear booties to enter my house. During covid, they wear masks to make customers feel safe. Not only Andrew and Larry did the awesome service, they also found out a hidden controller which we could not find to turn on the humidifier. On top of that, they took time to answer our questions patiently. After the service, I received a receipt by email. I would strongly recommend this company to friends.
Great service
Fred - Cheshire, CT 06410
Jonathan was fast and complete. You have an excellent worker.
Through Thick and Thin
Fred/Martha - Cheshire, CT 06410
When we had a problem with one zone of our heating system, X-Treme Temp worked with the problem until it was solved. We are most appreciative.
Very good job
Dick - Cheshire, CT 06410
Professional and friendly tech.
Joe - Cheshire, CT 06410
Very professional and knowledgeable.
john - Cheshire, CT 06410
Dyllan and John from X-treme just left after completing an evaporator coil replacement. I was extremely (no pun intended) impressed with their professionalism, cleanliness and knowledge. I've found it rare to experience this level of service and I tend to be a hard marker. Cost: The cost was fair. Its a little difficult in this economic market to really know gauge the cost. However I will say that I will without hesitation call on X-treme for any A/C issues. I also plan on using them for my heating as well.
First Time New Customer with NON Functional A/C
john - Cheshire, CT 06410
We are a new customer with X-Treme. Our A/C had no cooling capability. The technician (Andrew) arrived on time, was very professional. He checked the complete system for general condition. Our system clearly has a leak somewhere. He injected a UV tracer dye into the system and added refrigerant. We are happy we are getting cold air again but we have to wait for the dye to leak out enough to detect the leak. So we are not over but have a good start. I didn't rate the cost as I have no idea what is low or high. My guess the price was fair (as in reasonable).
Great service!
Sheila - Cheshire, CT 06410
Someone was sent over the same day that I called the office!
Larry H.
Checked the air handler, found the capacitor was bad. Replaced the capacitor and started the system. The blower turned on properly and the pipes are hot going to the coil.
Larry H.
Performed a heating pm on an oil furnace. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. System is operating properly.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests Bled air from all zones. When starting and testing the boiler we noticed water pooling on the ground by the base of the boiler. Upon further investigation we found a small leak is starting to develop between 2 sections of the boiler when the boiler temp is colder. Showed the customer the leak and informed them of what to do should the leak get more serious. Took pictures to work up a replacement quote.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 5.8%o2 40 ppm co 0 smoke While performing the maintenance the customer stated the autofeed was leaking by and he needs to periodically check the boiler and add pressure. After getting customer authorization we drained some pressure from the boiler and removed the old autofeed. Installed a new autofeed and purged air out of all 3 zones. Started and tested the system. When leaving boiler pressure was at 20 psi. Unit is working properly.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests Adjusted the schedule on thermostat for the customer
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests
Larry H.
Performed a heating pm on an oil furnace. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Replaced the air filter. 20x25x11 Started and checked the safeties. Performed a combustion test. 7.4% o2, 0 ppm, 86.7% efficient System is operating properly.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 6.4%o2 45ppm co 0 smoke
Andrew H.
Recovered the refrigerant from both systems. Removed and install a Trane XR15 3.5 ton condenser with a new indoor coil for the 1st fl and a Trane XR15 4 ton condenser with a new indoor coil for the 2nd fl. Pressure tested, evacuated and charged the 2 systems. Both are operating properly. total with tax $26,544.00 50% deposit $13,272.00 remaining balance due upon completion of install
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 9.5%o2 20 ppm co 0 smoke Would recommend replacing the indirect water heater due to its age and corrosion forming on the exterior on the bottom. Water heaters typically last around 10 years and this one is from 2008
Larry H.
Performed an A/C pm on (2) systems. Checked the air filters. Blew out the drain lines and tested the condensate pumps. Rinsed the condenser coil. Checked the electrical connections, pressures and temperatures. The 1st fl system was low on refrigerant. Added 1 lb 2 oz R22 to the system. The compressor is drawing high amps near the max. System is operating properly. Both systems are R22. Recommend replacing soon.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 7.2%o2 38 ppm co 0 smoke
Brandie-Lynn T.
The client was concerned that they would have to repair their air conditioner since it would not turn on. Our expert technicians inspected the unit and found out that there was an inexpensive issue with the thermostat. The client was so relieved that we resolved their problem quickly and without spending a fortune. We believe in building lasting relationships with our customers.
Andrew H.
Visually inspected indoor evap coil and blower compartment Checked all electrical connections and safeties Checked volts and amps Visually inspected air filter Rinsed condenser coil Blew out drain line and poured water to ensure properly draining Tested condensate pump Checked refrigerant levels Checked capacitor Took temps
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 7.2%o2 62ppm co 0 smoke While performing the heating maintenance we found the domestic water coil gasket was starting to leak when the water was cold. Visually inspected indoor evap coil and blower compartment Checked all electrical connections and safeties Checked volts and amps Visually inspected air filter Rinsed condenser coil Blew out drain line and poured water to ensure properly draining Tested condensate pump Checked refrigerant levels Checked capacitor Took temps While performing the maintenance we found the capacitor was well blow factory specifications. Recommended replacing the capacitor. After getting customer approval we replaced the capacitor. Found the system was slightly low on refrigerant. Informed the customer
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 5.6%o2 45ppm co 0 smoke After performing the maintenance we drained pressure from the system. Removed old autofeed combo and hi-vent. Installed new autofeed combo and hi-vent and filled system back up with water. Purged all 3 zones and started and tested the system. Had hot water coming back on all 3 returns. Unit was at 21psi when leaving.
Andrew H.
Recovered the refrigerant from the old system and removed it. Installed a new Fujitsu Aou24RLFWH 24,000 BTU heat pump condenser with a Asu24RLF 24,000 BTU indoor unit with a Flair Puck Pro integration control. Pressure tested and evacuated the system. Started and tested. System is operating properly. AHRI Certificate Reference # 8779046
Andrew H.
Drained water heater. Removed and replaced the the water heater with a New Bock 51E hot water heater and burner. Connected the water lines and flue piping. Filled and checked for leaks. Purged the lines. Started and tested. Performed a combustion test. System is operating properly.
Larry H.
Shut off the water and drained. Replaced the anode rods. Filled the system and checked the fittings for leaks and purged the air. After the tank was full there was a sound then hissing. Water started to come from the top of the tank. Checked and found a rust spot on the top of the tank next to the flue and that is where the water is coming from. The water heater needs to be replaced.
Larry H.
Water was dripping from the pressure relief valve. Checked the system and found water on the air side of the extrol tank. The extrol tank is bad and needs to be replaced. Replaced the tank and the pressure relief valve. Purged all the zones. (When the pressure relief valve opens, most of the time it does not reseat and stop dripping). Started and checked the operation of all zones.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 7.2%o2 28ppm co 0 smoke Need to replace the other humidifier pad. Replaced one of them with a customer supplied. Model 600m
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 4.3%o2 45ppm co 0 smoke
Larry H.
Checked Heat Pump system. System turns on properly. Checked pressures. 541psi hi side, 109psi lo side. The chart inside the unit calls for the system to be running at approximately 325psi hi/ 93psi lo at 40* outside temp. The system is overcharged. Recovered 1 lb 13 oz R-410a from the system. Replace the air filter, 18x20x1. The system is operating properly at this time. With the higher pressure, the compressor was operating at a higher temperature and could have shut off on thermal overload. With the compressor off, the thermostat has to drop several degrees before the heat strip turns on.
Larry H.
Performed a heating pm on (2) oil furnaces and (1) oil water heater. Brushed and vacuumed. Replaced the oil filter, nozzles and strainers. Checked the air filters - they still look ok. Started and checked the safeties. Performed a combustion test. System is operating properly. While replacing the oil filter, notice the filter was dirty and had a few drops of water in the bottom of the canister. Recommend adding an additive to the tank to help keep the oil clean. Added a bottle of Hot Shot oil additive to the tank. The water heater is 10 yrs old. Recommend replacing the anode rods in the tank.
Larry H.
Checked the system. When the 2nd fl thermostat is calling the zone damper was closed. Freed the damper and opened and closed several times with the thermostat. The zone damper is operating at this time but may stick in the closed position in the future. Recommend replacing the zone damper. The zone panel is old. Recommend replacing the zone panel, dampers and thermostats.
