Read the reviews below from Meriden, CT residents to see what your neighbors say about our expertise and customer service. We offer Heating & Cooling Services in Meriden CT
Local Reviews
for Meriden, CT
Our Reviews by City
Excellent service
Diane - Meriden, CT 06450
Polite. Professional. Wonderful job. Would highly recommend this company
Great service on time and very clean and thoughtful
fred - Meriden, CT 06450
Best HVAC Company Out There.
Jennifer - Meriden, CT 06451
Couldn’t be happier with the guys at Xtreme. Top notch service at an affordable price. They show you and explain everything in great detail. Highly recommend.
Good service
Julie - Meriden, CT 06451
Great service; respectful and provided explanations
great service
Tom - Meriden, CT 06450
Excellent service.
gregory castro - Meriden, CT 06450
Larry Halpin was outstanding. Great job.
Very good service
Bethany - Meriden, CT 06451
Andrew was kind and knowledgeable. Highly recommend.
Response from X-Treme Temp Heating & Cooling, LLC:
Thank you so much for this 5-star review. We really appreciate you being a customer and helping to share the word about us. We’re here for you anytime.
Great service
Vern - Meriden, CT 06451
Very knowledgeable & please with job performance.
Mini Split System Repair
Murphy - Meriden, CT 06451
Very knowledgeable and quickly fixed my problem.
Excellent Service!
Scott - Meriden, CT 06450
Excellent Service
Richard - Meriden, CT 06450
Tech was courteous and professional. Explained everything clearly. Great service!
Response from X-Treme Temp Heating & Cooling, LLC:
We are happy to hear you had a positive experience!
Convenient maintenance
Katie - Meriden, CT 06451
I scheduled an appointment for an AC maintenance which was carried out in a timely way with no difficulty. I appreciate having a detailed report and a sense of my older system's condition.
Use This Company Every Year
Jackie - Meriden, CT 06450
Dependable and great service. Thank you!
X-tremely thorough
Robert - Meriden, CT 06450
Great experience
Keith - Meriden, CT 06450
Quick response to an emergency. Tech was very professional, knowledgeable and courteous.
Response from X-Treme Temp Heating & Cooling, LLC:
Thank you so much for your 5-star review! We will share this with the team to let them know to keep up the amazing work.
Best Service!
Matt - Meriden, CT 06450
Larry and his entire team are always professional, personable and very responsive. He is transparent when explaining services performed, recommendations and pricing.
Excellent service
Patricia - Meriden, CT 06450
Excellent
Freddie - Meriden, CT 06450
Andrew kicked ass and got me heat back in my house
Excellent Company and Staff!
Rebekah - Meriden, CT 06451
You can’t go wrong with Xtreme Temp! They are very professional, discuss everything in detail that has been done, and are very reasonable!
Excellent service!
Amilcar - Meriden, CT 06450
Very detailed, informative and answered all my questions.
Excellent Experience and Service
Manual - Meriden, CT 06450
Professional Service. I highly recommend Xtreme Temp.
Always quality and friendly service
Franciscan Brothers - Meriden, CT 06451
Professionalism
Juan - Meriden, CT 06451
Very pleased with the work performed and grateful for letting me know of any possible problems that may arise in the future.
Excellent service
Leonard - Meriden, CT 06451
Outstanding Work
george - Meriden, CT 06450
super job, furnace has NOT run this good since new!! Highly recommend "X-Treme!!
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests Upon arriving customer stated they saw the pressure levels get over 20 psi. While performing the maintenance we found when the boiler heats up the pressure increases significantly indicating the expansion tank is going bad and the extra pressure in the boiler has nowhere to go. After getting customer authorization we drained pressure from the system and removed the old expansion tank. Installed new expansion tank and filled the system back up with water. Purged both zones of air and started the system. Unit is working properly. When leaving boiler pressure was at 18 psi Greg’s chimney 203 630 1976
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 7.2% o2, 0 ppm, 81.7% efficient System is operating properly.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 4.5%o2 40 ppm co 0 smoke While performing the maintenance we found the corrosion from the hot water coil has spread farther onto the boiler. The corrosion is now starting to form on one of the boiler clean-out covers. Could not remove 1 out of 3 clean-out covers. This section of the boiler will begin to get plugged with soot because of this and will eventually lead to performance issues. Showed the customer the corrosion on the boiler. Recommend replacing the boiler soon to avoid any issues with the corrosion.
Andrew H.
Upon arrival unit was off on reset. Pushed the reset button and the unit did not light. Checked oil flow and had no flow. Upon further investigation we found the oil pump side of the burner coupling was stripped. Replaced the coupling and attempted to start the unit. Found the unit was not lighting. Checked the igniter and found it was very weak and starting to fail. Also found the primary control was not fully completing the ignition cycle and was restarting itself without going into lockout. Replaced the igniter and the primary control. Started and tested the system. Unit is working properly
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 4.4% o2, 1 ppm, 82.0% efficient System is operating properly.
Andrew H.
Upon arrival unit was on but not running. Customer turned the thermostat up and the unit fired up with no issue. Hooked up genesis control and went through the last 15 run cycles. We found the ohm levels were averaging between 800 and 1100. Took the nozzle out and found the nozzle was dripping and not spraying correctly. There was oil residue in the blast tube and on the electrodes. Replaced the nozzle and wiped down the oil residue. Tried adjusting the cad cell eye and got the ohms to go down slightly. Replaced the cad cell eye and the ohms dropped by 400. Started and tested the boiler. When leaving the cad cell was reading 480 ohms which is acceptable. Unit was running at 7.7%o2 28 ppm co 0 smoke
Larry H.
Performed a heating pm on (3) RTU’s. Replaced the air filters, checked the belts. Inspected the heat exchangers. Cleaned the flame sensors. Checked the electrical connections and safety’s. Checked the gas pressures. The back rtu, the blower motor was drawing 6.4amp and it’s rated for 6.2 amp. The motor may fail in the future due to over amping. The middle rtu(smaller unit), after checking the operation of the unit, there was a clicking noise for a relay. The board was flashing 2 times which is -system error. Reset the unit, and it started properly. All of the electrical connections are tight and relays are working correctly. If the issue happens again, recommend replacing the control board.
Larry H.
Water was coming from the pressure relief valve. Found the extol tank is full of water causing the relief valve to leak due to no where for the water to expand. The extol tank and pressure relief valve need to be replaced. Drained the system. Replaced the extol tank and pressure relief valve. Filled and purged both systems. After purging, the pressure slowly increased due to the auto feed was leaking by. Valve off the auto feed. The pressure is stable between 17-20 psi. There is a 1 1/2” pipe coming out of the boiler that has a slow drip. The customer has tape and a clamp over it. The flue pipe for the water heater has a hole in it. Both the boiler and water heater flue pipes need to be replaced due to corrosion and a hole.
Larry H.
Performed a heating pm on a steam oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Cleaned the sight glass and flushed the low water cut off. Performed a combustion test. 7.4% o2, 13 ppm, 79.7% efficient System is operating properly While flushing the Low water cut off, the nipple for the ball valve broke due to age and rusted. Removed and installed a new nipple before the ball valve.
Andrew H.
We will remove the old 1” vent piping at the oil tank. Drilled out an area in the foundation and installed a 2” combination whistle/ gauge at the tank and 2” vent pipe to the outside. Filled the hole with a spray foam and concrete to seal the opening.
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. System is operating properly. The oil leak is from the oil line in the floor. Recommend replacing the line from the tank to the burner.
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 4.4% o2, 0 ppm, 84.7% efficient System is operating properly. The water heater is leaking from the bottom. The water heater needs to be replaced.
Larry H.
Removed and replaces the zone panel for the downstairs circulator. Started the zone and there was air in the line. Purged both zones. System is operating properly.
Larry H.
Checked system. The boiler was plugged. There was a lot of cat hair around the air band reducing the air going in for combustion. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 8.4% o2, 49 ppm, 82.7% efficient System is operating properly.
Andrew H.
Brushed and vacuumed burner tubes Inspected and vacuumed burner compartment and surrounding area Checked electrical connections and safeties Checked gas pressure Performed combustion test Inlet pressure- 7.629 in.w.c. Manifold pressure- 3.143 in.w.c. While performing the maintenance we found the hi- ent above the expansion tank had been leaking in the past and we heard air in the lines when the system started. After getting customer authorization we replaced the hi-vent. Bled air from all 3 zones. Started and tested all zones. Unit is working properly. Boiler pressure when leaving was 17 psi
Larry H.
Checked the system. The thermostat was on and calling for heat. The circulator was running but the zone valve was not open. Removed the zone head to make sure the stem moves. The zone valve head was very hot and not opening. The zone valve head is bad. Replaced the head and checked the operation. Had hot water going upstairs to both radiators. System is operating properly.
Andrew H.
Oil furnace pm Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 6.6%o2 21ppm co 0 smoke
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 7.8% o2, 0 ppm, 80.6% efficient System is operating properly. The downstairs zone panel is bad and needs to be replaced. It is not sending power to the circulator. The flue pipe will need to be replaced soon. The metal is starting to become soft.
Larry H.
Replaced the control board in the gas furnace. Started and tested several times. System is operating properly.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests While performing the maintenance we found some water inside of the oil filter canister and the oil strainer. Highly recommend getting a water and sludge additive for the oil tank to prevent any issues. Took pictures for a oil tank replacement quote
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests 7.1%o2 30 ppm co 0 smoke
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests While performing the maintenance we noticed a small leak starting between two of the sections of the boiler. Took pictures for a replacement quote. Customer stated they weren’t getting heat to the second floor. Upon investigation we found the zone valve actuator had gone bad and was not fully opening the valve. Replaced the zone valve and bled both zones of air. Started and tested both zones. Unit is working properly.
Andrew H.
Brushed and vacuumed flue pipe and heat exchanger Replaced oil filter, nozzle, and strainer Checked all electrical connections and safeties Performed combustion and smoke tests
Larry H.
Performed a heating pm on an oil boiler. Brushed and vacuumed. Replaced the oil filter, nozzle and strainer. Started and checked the safeties. Performed a combustion test. 8.9% o2, 7 ppm, 81.2% efficient System is operating properly. While performing the maintenance, there was a small spot of water under the drain pipe for the pressure relief valve. Recommend replacing in the future. Also, the transformer is showing signs of it starting to get weak. The spark is traveling 1/4-1/2 the distance and starting to turn yellow. The spark should be blue and travel 1/2-3/4 the distance. Recommend replacing the transformer.
